Chemical metallization
Widen the field of possibilities!
Take advantage of an innovative technology to easily make plastic or 3D-printed parts conductive and treat them in an electrolytic bath afterwards.
With Metalfog. you will say goodbye to the chemists thanks to a turnkey, patented pre-metallisation technology.
Metalfog is the fruit of continuous development over more than 5 years and is central to our know-how. Use Metalfog to easily make all plastic or 3D-printed parts conductive.
Optimise your production facilities : from engineering design department to galvanising workshop. Ready to use, its simplified installation and its touch screen interface make Metalfog a machine accessible to all, quickly adopted by your employees.
Metalfog allows you to:
Spraying at ambient temperature and pressure Rotation around 4 axes for full coverage of parts Integrated aerosol filtration system 
Available in 2 versions.
| MODELE M | MODELE L | |
|---|---|---|
| Average cycle time | 6 minutes | 6minutes |
| Chemical reagents | CMR-free | CMR-free |
| Useful treatment volume | 10 litres virtual cylinder ø 200 x 250 mm | 18 litres virtual cylinder ø 250 x 370 mm |
| Rotating part holder | 36 locations | 48 emplacements |
| Useful load | 1 kg max | 1,5 kg max |
| Machine dimensions | 600 x 650 x 1360 mm | 800 x 800 x 1360 mm |
| Empty weight | 65 kg | 95 kg |
| Power supply | 230 V - 10 A | 230 V - 10 A |
| Air supply | 6 bars - 300 l/min - Dry, oil-free air | 6 bars - 300 l/min - Dry, oil-free air |
PROCESSES → Cleaner | Utility Silver Layer | MiM | LOOK LIKE CHROMIUM® | Fara D Layer SOLUTIONS → Uscleaner | Smoothit | Metalfog
© COPYRIGHT 2021 | Legal notices | Crédit photos : @Cyril-Crespeau
Powered by the Web Agency Marque Digitale
