Widen the field of possibilities!
Take advantage of an innovative technology to easily make plastic or 3D-printed parts conductive and treat them in an electrolytic bath afterwards.
With Metalfog. you will say goodbye to the chemists thanks to a turnkey, patented pre-metallisation technology.
Metalfog is the fruit of continuous development over more than 5 years and is central to our know-how. Use Metalfog to easily make all plastic or 3D-printed parts conductive.
Optimise your production facilities : from engineering design department to galvanising workshop. Ready to use, its simplified installation and its touch screen interface make Metalfog a machine accessible to all, quickly adopted by your employees.
Metalfog allows you to:
Available in 2 versions.
|MODELE M||MODELE L|
|Average cycle time||6 minutes||6minutes|
|Useful treatment volume||10 litres virtual cylinder ø 200 x 250 mm||18 litres virtual cylinder ø 250 x 370 mm|
|Rotating part holder||36 locations||48 emplacements|
|Useful load||1 kg max||1,5 kg max|
|Machine dimensions||600 x 650 x 1360 mm||800 x 800 x 1360 mm|
|Empty weight||65 kg||95 kg|
|Power supply||230 V - 10 A||230 V - 10 A|
|Air supply||6 bars - 300 l/min - Dry, oil-free air||6 bars - 300 l/min - Dry, oil-free air|